Español
العربية
Francés
Русский
Português
Deutsch
Italiano
ภาษาไทย
Tiếng Việt
日本語
한국어
हिंदीName
Indonesia
پرسیا
اوردو
nameL-ProlinamideCAS NO7531-52-4Molecular formulaC5H10N2Omelting point95-97 °Cboiling point213.66°C (rough estimate)refractivity1.4720 (estimate)Storage conditionsKeep in dark place,Inert atmosphere,Room temperaturesolubilityChloroform (Slightly), Methanol (Slightly)formPowder or GranulescolourWhite
Contact Now
Melting Point180-185 °C(lit.)Density1.18 g/mL at 25 °C(lit.)Refractivityn20/D 1.465Storage Conditionsroom tempSolubilityH2O: 6 M, clear, colorlessFormCrystalsColourWhite to slightly yellowPh Value4.5-5.5 (100g/l, H2O, 20℃)1. It can be used as an intermediate in medicine, pesticides, dyes, and different natural synthesis.
Contact Now
Application1. Used as formaldehyde trapping agent to remove formaldehyde remaining in fabrics after finishing by 2D-resin, KB-resin, urea-formaldehyde resin, melamine-formaldehyde resin, etc. It is also used as an intermediate of fine chemicals, used in the manufacture of resins, plasticizers, spray paint, adhesives, etc.2. used as formaldehyde capture agent, intermediate of fine chemicals, also used in the manufacture of resins and formulation of plasticizers, spray paint, adhesives and other uses for the synthesis of chiral microporous materials prepared from non-chiral precursors;3.
Contact Now
Melting point1975 ° CBoiling point1949.9 ° C (estimated)Density5.6Refractive index2.008~2.029Flash point27 ℃Storage conditionsStoreat+5 ° Cto+30 ° CSolubility0.0016g/linsolubleFormnanopowderColorWhiteChemicalbooktopaleyellowSpecific gravity5.61Zinc oxide, additionally recognized as zinc white, is a pure white powder composed of amorphous or needle fashioned small particles.
Contact Now
Chinese namebutadiene rubberChinese synonym butadiene rubberEnglish titleButadiene rubberMolecular weightzeroButadiene rubber is presently the 2d greatest rubber species in the world after styrene butadiene rubber. The distinction in microstructure of butadiene rubber on the whole relies upon on the catalyst, polymerization solvent, and polymerization response Chemicalbook temperature.
Contact Now
nameNitazoxanideCAS NO55981-09-4Molecular formulaC12H9N3O5Smolecular weight307.28melting point202°Cdensity1.629 g/cm3Storage conditions2-8°CsolubilitySoluble in DMSO (>50 mg/ml)formsolidcolourOff-white
Contact Now
name3-Amino-1-hydroxyadamantaneCAS NO702-82-9Molecular formulaC10H17NOmelting point265 °Cboiling point266.8±23.0 °C(Predicted)density1.252±0.06 g/cm3(Predicted)Storage conditionsKeep in dark place,Inert atmosphere,Room temperaturesolubilityDMSO (Slightly), Methanol (Slightly)formCrystalline PowdercolourWhite to yellow
Contact Now
Chinese nameSodium oleateChinese aliascis 9-octadecenoic acid sodium salt; (Z) -9-octadecenoic acid sodium salt -9-octadecenoic acid sodium salt; 9-Octadecylic acid sodium; Sodium octadecene; (Z) -9-Octadecylic acid sodium salt;English nameSODIUM OLEATEEnglish aliascis Oleate sodium salt; Cis-9-Octadecenoic acid sodium salt, Oleic acid sodium salt; Eurol; Pionin D 951P; Oleic Acid Sodium Salt;CAS number143-19-1Molecular formulaC18H33NaO2Molecular weight304.44300Precision quality304.23800PSA40.13000Sodium oleate, additionally acknowledged as sodium octadecene, cis 9-octadecenol,
Contact Now
Coconut oil is recognized as the "healthiest oil on Earth". Coconut oil, as a medium chain fatty acid, has drastically special physiological consequences on the human physique in contrast to the often discovered lengthy chain fatty acids in our food. The saturated fatty acids in coconut oil are on the whole medium chain fatty acids.
Contact Now
Melting point 1204 ° CDensity2,52g/cm3FormPowderSpecific gravity 2.52ColorwhiteWater solubilityinsolublecoldH2ChemicalbookO, decomposeinboilingH2OHydrolysis sensitivity 2: reactswithaqueousacidLithium silicate is a compound fashioned with the aid of the shape of metal lithium and silicate ions, and its alternate identify is lithium water glass. Most of them use the lithium hydroxide technique to react sodium silicate with sulfuric acid to produce hydrated silicic acid and sodium sulfate.
Contact Now
Sodium p-styrene sulfonate has the following characteristics:1) Stability, polymerization resistance, and consolidation resistance all through storage;2) Thermal stability: Excellent in phrases of warmness resistance, it will now not decompose beneath 300 ℃;3) Polymerization: As a kind of sulfonic acid monomer, it has a excessive diploma of polymerization due to its inducing impact of binding to the sulfonic acid team in the para position;4) Free radical polymerization can be performed the
Contact Now
It is a combination of quite a number molecules with a complicated structure.Soluble in water, with proper floor activity, however with some disagreeable odor.Mainly used for the training of naphthenic acid metallic soaps, with a small quantity used in the components of low-end washing products.Used as emulsifiers, detergents, and plant boom regulators.
Contact Now
AppearanceAmber obvious liquidSolid content% ≥ 40.0Density (20 ℃)g/cm3 ≥ 1.20PH fee (1% aqueous solution)9.0-11.0Solubility15gPolyaspartic acid (PASP) belongs to a crew of polyamino acids. Polyaspartic acid is susceptible to breakage due to the motion of microorganisms, fungi, and different factors, ensuing in the degradation of environmentally pleasant ammonia, carbon dioxide, and water. Therefore, polyaspartic acid has a extensive vary of uses.
Contact Now
Melting point>300 ° C (lit.)Storage conditionsnorestrictionsSolubility H2Osoluble25mg/mLFormPowderColor index45400ColorWhite to light creamPH value5.5-7.5 (100g/l, H2O, 20 ℃)PH cost vary of acid-base indicator discoloration5.5-7.5 (100g/l, H2O, 20 ° C)water solubilitySoluble in waterSodium dodecyl sulfonate is a broadly used anionic surfactant, which is a white or barely yellow powder with houses such as decontamination, wetting, foaming, emulsification, dispersion, coagulation, degreasing and deinking.
Contact Now
Oil soluble nano iron 1% - 10%, naphthenic acid 5% - 25%, barium naphthenate 10% - 30%, polyisobutene succinimide 5% - 10%, long-chain fatty acid 1% - 5%, and the relaxation is solvent. The instruction technique is as follows: add naphthenic acid drill, barium naphthenate, oil soluble nano iron and long-chain fatty acid into the solvent in flip at room temperature in accordance to the ratio, stir evenly, and then add polyisobutylene succinimide to stir evenly.
Contact Now
Boiling Point168-274 ° COdorat 100.00?%. mild ammoniaSOLUBLE5-10 g/100 mL at 18 ºCStabilityStable. Combustible. Incompatible with strong oxidizing agents.Introduction: N, N-bis (hydroxyethyl) coconut oil amide can be used as a surfactant.
Contact Now
Melting point>300 ° CDensity1.203-1.209 g/cm3FormPowderColorWhitewater solubilitySoluble in water.Merck147668Potassium silicate is a colorless or barely yellow translucent to transparent glassy substance. It has hygroscopicity. There is a robust alkaline reaction. Dissolve in acid to precipitate silica. Slowly soluble in bloodless water or nearly insoluble in water (depending on its composition), insoluble in ethanol.
Contact Now
Thermoplastic resin, hydrolyzed into polyvinyl alcohol in acid or alkaline solvents, is the main raw material for preparing polyvinyl alcohol. When molecules contain photosensitizers, they are sensitive to light and undergo decomposition reactions under the action of ultraviolet light or electron beams, exhibiting positive photosensitive resin properties. It can copolymerize with various monomers with double bonds, introducing various functional groups and possessing different properties.
Contact Now
1. Used for ester trade reactions.2. Use as an additive and intermediate in chemical products.3. Use: It is used to put together adhesive and as catalyst for transesterification and polymerization reaction.4. Use It is used to make adhesives between metallic and rubber, metallic and plastic, as nicely as catalyst for transesterification and polymerization, and uncooked substances for pharmaceutical industry.5. Catalysts used for esterification reactions, ester to ester conversion reactions of esters such as acrylic acid.
Contact Now
Ethyl acetate is a broadly used satisfactory chemical product with incredible solubility, fast drying, and a large vary of uses. It is a very essential natural chemical uncooked cloth and tremendous industrial solvent, and is extensively used in the manufacturing procedure of acetate fiber, ethyl fiber, chlorinated rubber, ethylene resin, acetate fiber resin, artificial rubber, coatings, and paints.
Contact Now
nameTulathromycin ACAS NO217500-96-4Molecular formulaC41H79N3O12molecular weight806.09melting point186-188℃boiling point853.8±65.0 °C(Predicted)Storage conditionsKeep in dark place,Inert atmosphere,Store in freezer, under -20°CsolubilityDMSO (Slightly), Methanol (Slightly)formSolidcolourWhite to Off-White
Contact Now
nameVildagliptinCAS NO274901-16-5Molecular formulaC17H25N3O2molecular weight303.4boiling point531.3±50.0 °C(Predicted)density1.27flash point275.1℃Storage conditionsKeep in dark place,Inert atmosphere,Store in freezer, under -20°CformsolidcolourWhite
Contact Now
Density1.13 [at 20 ℃]Vapor pressure0.317Paat25 ℃FormViscousLiquidColorGreenWater solubilityIn soluble in waterExposure limitNIOSH: IDLH10mg/m3; TWA0.015mg/m3Nickel naphthenate is an natural compound with the chemical formulation of C22H14NiO4. It is normally used as paint drier, timber preservative, water resistant agent for fabrics, insecticide and bactericide.
Contact Now
nameMK-4827 (tosylate)CAS NO1038915-73-9Molecular formulaC26H28N4O4Smolecular weightmolecular weightmelting point>142oC (dec.)Storage conditions-20°C FreezersolubilityMethanol (Slightly)formformcolourOff-White to Pale Yellow
Contact Now
