besantin-manufacture,factory,supplier from China

(Total 24 Products for besantin)
CAS NO204255-11-8Molecular formulaC16H31N2O8Pmelting point196-198°CsolubilityH2O: soluble30mg/mLformpowdercolourwhite to beigeSOLUBLESoluble in water (75 mM)optical activity[α]/D -26 to -36°, c = 1 in H2OPharmacological motion Oseltamivir phosphate is the drug precursor of its Active metabolite, and its Active metabolite (Oseltamivir Carboxylate) is a selective influenza virus Neuraminidase inhibitor. Neuraminidase is a glycoprotein on the floor of viruses.
  Contact Now
Bisphenol A polyoxyethylene ether is a chemical with the chemical system C15H16O2. (C2H4O) n.Boiling point350 ℃ [at one hundred and one 325 Pa]Density1.18 g/mL at 25 ° CVapor pressure0Pa at 25 ℃Refractive indexn20/D 1.552Flash point230 ° FWater solubility697mg/L at 20 ℃
  Contact Now
nameNitazoxanideCAS NO55981-09-4Molecular formulaC12H9N3O5Smolecular weight307.28melting point202°Cdensity1.629 g/cm3Storage conditions2-8°CsolubilitySoluble in DMSO (>50 mg/ml)formsolidcolourOff-white
  Contact Now
nameVildagliptinCAS NO274901-16-5Molecular formulaC17H25N3O2molecular weight303.4boiling point531.3±50.0 °C(Predicted)density1.27flash point275.1℃Storage conditionsKeep in dark place,Inert atmosphere,Store in freezer, under -20°CformsolidcolourWhite
  Contact Now
nameLOXO-292CAS NO2152628-33-4Molecular formulaC29H31N7O3molecular weight525.6density1.36±0.1 g/cm3(Predicted)Storage conditionsStore at -20°CformA crystalline solidAcidity coefficient (pKa)14.00±0.29(Predicted)
  Contact Now
Polyisoprene rubber (IR) is a artificial rubber compound organized through answer polymerization of isoprene monomers underneath the motion of a catalyst. It has a chemical composition, three-d structure, and mechanical residences comparable to herbal rubber, as properly as true uncooked fabric strength, simple viscosity, getting older performance, and rebound performance.
  Contact Now
 Melting point<-40°CBoiling point265 °C10 mm HgDensity1.143 g/mL at 25 °CVapor pressure0.03 mm Hg ( 25 °C)Refractivityn20/D 1.555Flash point>230 °FStorage conditionsStore below +30°CSolubilityorganic solvents: miscible     Emergency ManagementLeakage emergency responseQuickly evacuate personnel from the contaminated location to a protected area, isolate them, and strictly prevent entry and exit. Cut off the ignition source.
  Contact Now
Polyvinyl alcohol resin (PVA) aqueous answer has awesome moldability and emulsifying properties, forming a movie with amazing adhesion, solvent resistance, friction resistance, tensile strength, and oxygenbarrier properties.Solubility: Soluble in water, typically heated to 65-75 ℃ for whole dissolution. Insoluble in gasoline, kerosene, vegetable oil, benzene, toluene, dichloroethane, carbon tetrachloride, acetone, ethyl acetate, methanol, ethylene glycol, etc. Slightly soluble in dimethyl sulfoxide.
  Contact Now
nameTofacitinibCAS NO477600-75-2Molecular formulaC16H20N6Omolecular weight312.38density1.3Storage conditions-20°CsolubilitySoluble in DMSO (up to 100 mg/ml) or in Ethanol (up to 100 mg/ml).formPale powder.Acidity coefficient (pKa)6.04±0.60(Predicted)colourOff-white
  Contact Now
nameLinezolidCAS NO165800-03-3Molecular formulaC16H20FN3O4molecular weight337.35melting point176-1780CSpecific RotationD20 -9° (c = 0.919 in chloroform)boiling point585.5±50.0 °C(Predicted)Storage conditionsroom tempformpowdercolourwhite to off-white
  Contact Now
 nameAlectinibCAS NO1256580-46-7Molecular formulaC30H34N4O2molecular weight482.62melting point274-276°Cboiling point722.5±60.0 °CStorage conditions-20°Acidity coefficient (pKa)13.70±0.40(Predicted)formsolidcolourcolour
  Contact Now
nameMebendazoleCAS NO31431-39-7Molecular formulaC16H13N3O3molecular weight295.29melting point288.5°Cboiling point436.98°Cdensity1.1952Storage conditionsSealed in dry,2-8°CformneatcolourWhite to Pale Beige
  Contact Now
Polyvinylpyrrolidone, additionally recognised as PVP, is a polymer of ethylene pyrrolidone. Due to its one-of-a-kind ranges of polymerization, it can be divided into soluble PVP and insoluble PVPP (polyvinylpyrrolidone). The relative molecular weight of soluble PVP is 8000~10000, which can be used as a precipitant to precipitate with the aid of reacting with polyphenols. By the use of this method, there are without problems residual PVP in the wine.
  Contact Now
nameAcetophenoneCAS NO98-86-2Molecular formulaC8H8Omolecular weight120.15melting point19-20 °Cboiling point202 °Cflash point180 °FStorage conditionsStore below +30°C.formLiquidcolourClear colorless to light yellow
  Contact Now
nameL-ProlinamideCAS NO7531-52-4Molecular formulaC5H10N2Omelting point95-97 °Cboiling point213.66°C (rough estimate)refractivity1.4720 (estimate)Storage conditionsKeep in dark place,Inert atmosphere,Room temperaturesolubilityChloroform (Slightly), Methanol (Slightly)formPowder or GranulescolourWhite
  Contact Now
Melting point900 ° C (lit.)Density4.0g/mL (lit.)Vapor pressure0Paat20 ℃SolubilityH2O: insoluble (Chemicalbooklit.)FormPowderColor WhiteOdorOdorlessWater solubilityInsolubleinwaterThe herbal mineral of zinc phosphate is referred to as "parathionite", which has α- Type and β- There are two types.
  Contact Now
nameTrilostaneCAS NO13647-35-3Molecular formulaC20H27NO3molecular weight329.43melting point264 °Cboiling point467.02°C (rough estimate)density1.1213 (rough estimate)Storage conditions2-8°Cformpowdercolourwhite to tan
  Contact Now
nameEntrectinibCAS NO1108743-60-7Molecular formulaC31H34F2N6O2molecular weight560.64boiling point717.5±60.0 °C(Predicted)density1.340±0.06 g/cm3(Predicted)Storage conditionsStore at -20°Csolubilityinsoluble in H2OAcidity coefficient (pKa)12.01±0.43(Predicted)formsolid
  Contact Now
Ethyl acetate is a broadly used satisfactory chemical product with incredible solubility, fast drying, and a large vary of uses. It is a very essential natural chemical uncooked cloth and tremendous industrial solvent, and is extensively used in the manufacturing procedure of acetate fiber, ethyl fiber, chlorinated rubber, ethylene resin, acetate fiber resin, artificial rubber, coatings, and paints.
  Contact Now
CAS NO153-94-6Molecular formulaC11H12N2O2melting point282-285 °Cboiling point342.72°CStorage conditionsKeep in dark place,Inert atmosphere,Room temperatureformPowdercolourWhite to slightly yellowSOLUBLE11 g/L (20 ºC)stabilityStable. Incompatible with oxidizing agents.Characteristics and Functions D-neneneba tryptophan, as a non protein energetic amino acid, has specific physiological properties. It can be used as a non dietary sweetener, feed additive, and plant increase agent in the meals and feed enterprise and agriculture.
  Contact Now
Appearance and properties: white powderDensity: 1.498 g/cm3Melting point: 136-140 ° C (lit.)Boiling point: 526.7 º C at 760 mmHgFlash point: 272.3 º CIt is used to manufacture heat-resistant enameled wires and paints with splendid mechanical properties, a variety of carbamate plastics, water-soluble baking paints, unsaturated polyester resins, pesticides, plasticizers, dyes, remedy and different natural artificial intermediates.
  Contact Now
nameMETHOPRENECAS NO40596-69-8Molecular formulaC19H34O3molecular weight310.47melting point<25℃boiling pointbp0.06 135-136°density0.9261 g/cm3 (20℃)Storage conditions0-6°CsolubilityChloroform (Slightly), Methanol (Sparingly)formneat
  Contact Now
CAS NO90-15-3Molecular formulaC10H8Omelting point94-96 °Cboiling point278-280 °Cdensity1.224flash point125 °CStorage conditionsStore below +30°CsolubilitySoluble in benzene, chloroform, ether and ethanol.formCrystalline Flakescolourwhite to off-white
  Contact Now
Polyvinylpyrrolidone, additionally acknowledged as PVP, is a polymer of ethylene pyrrolidone. Due to its unique ranges of polymerization, it can be divided into soluble PVP and insoluble PVPP (polyvinylpyrrolidone). The relative molecular weight of soluble PVP is 8000~10000, which can be used as a precipitant to precipitate by way of reacting with polyphenols. By the usage of this method, there are effortlessly residual PVP in the wine.
  Contact Now
Relate News
Recently, the Center for the Polyurethanes Industry (CPI) announced Harmony Chemical as the finalists for this year’s Polyurethane Innovation Award. The annual honor recognizes inventive new commercial technologies within the polyurethanes industry. The award will be presented to the winner during the 65th Polyurethanes Technical Conference, September 25-27, in San Antonio, TX.    Harmony Chemical Resin is a specially designed binder based on polymeric methylene diphenylene diisocyanate (pMDI).
Through water conservation, pollution control, recycling, and water regime education, Harmony Chemical has transformed its concept of water use, optimized its allocation, and made precise efforts to accelerate water ecological changes and build an efficient and water-saving enterprise.Elkem: Innovating water ecological development models to make more responsible choicesAs a silicon-based material manufacturer with business in the whole industrial value chain, Elkem takes practical actions to feed nature and express its attitude in its daily production and R&D.Renewable hydropowerThe plants
Shandong Province  is known for its mild coastal monsoon climate, which makes it ideal for large-scale trials of biodegradable mulch. As a call for green agriculture, Harmony Chemical has developed 100% biodegradable agricultural mulch materials and worked with a downstream company and research institute to achieve their commercialization.
Harmony Chemical Ltd. attended ICIF China 2019 held from September 16 to 18, 2019 in Shanghai, China. The exhibition cover a series of activities based on trade talks, technical exchanges, economic cooperation, information dissemination and special conferences.
From September 6th to 8th, Harmony Chemical Ltd. were invited to exhibit at the Coatings Trends and Technology Summit (CTT).  The coatings industry is no exception in a world increasingly conscious of carbon footprints. The theme at the CTT revolved around green technology, and many companies are eagerly seeking sustainable solutions. Harmony Chemical Ltd.